58cc - DLA

!
DLA58

DLA58 58cc rc model gas engine (6hp, 1555gr)

DLA Engine DLA58 gas engine for rc model airplanes.

 Output Power  

 6hp/4.4kW

 Propeller  

 22x10; 23x10; 24x8

 Weight  

 1410g/1555g (excl./incl. muffler and ignition)

  Delivery includes: spark plug and ignition.

 

WIKERC_IBEF21

IBEF Ignition Battery Eliminating Filter, WIKE R/C, Down and Locked

This device from WIKE R/C Products will allow you to safe the weight of an extra ignition battery and provides an integrated engine kill switch.The IBEF is designed to be plugged into the receiver and run the ignition from the receiver batteries or power system. Ignition power can be turned on and off by assigning the channel the IBEF is plugged into to a 2 position switch. A spare receiver channel is needed to use this switch.  A remote mountable led is included to indicate ignition arming status.

RCEXLOptoKillSW

Opto Coupled Gas Engine Kill Switch

This device will allow you to safely and remotely shut-down your electronic ignition equipped engine from your transmitter. A spare receiver channel is needed to use this switch. 

A remote mountable led is included to indicate ignition arming status.

BPVS-S

(ROTO, RCGF, DLE etc) ALU Air Intake Horn Tube or Velocity Stack Small

Aluminium Air Inlet Horn or Velocity Stack for engines upto 60cc

Weight (gewicht): 12g

Color (kleur): Red or Blue (sent random).

Can be used for e.g. RCGF15 .. RCGF60 and DLE20, DLE30, DLE55 .. DLE60.

DLE55EMFT

Exhaust manifold with flexible tube RCGF55, RCGF111, DLE55, DLE111

For DLE55, RCGF55, DLE111, RCGF111 engines.

Ø 25 mm with flexible section
Length is ~32cm

RCGF55EMFT

Exhaust manifold with flexible tube RCGF55, RCGF111, DLE55, DLE111

For DLE55, RCGF55 engines.

Ø 25 mm with flexible section
Length is ~32cm

DLE55PM

Pitts Style Muffler DLE55

Fits DLE55 as well as e.g. the RCGF55.

RCGF55CM

Canister Muffler RCGF55, DLE55

Fits DLE55, EME60, DLA58, RCGF55.

Polished aluminium canister with stainless steel flexible header pipe and teflon couple with two clamps.

Gasket and screws included.

KS-86V-6

Krumscheid Canister Muffler, up to 65 cc

Krumscheid demper voor motoren tot 65 cc (RCGF55, RCGF111, DLE55, DLE60, EME60, DLE111, DLA58, DLA116 etc.)

Ø 25 mm aansluiting. Lengte 25 cm, Diameter 6 cm. gewicht 225g.
Met de in- en uitgang richting de motor.

Deze demper zorgt ervoor dat de geluidsnorm van 80dBA kan worden gehaald.

KS-86VS-6

Krumscheid Canister Muffler with smoker, up to 65 cc

Krumscheid demper voor motoren tot 65 cc (RCGF55, RCGF111, DLE55, DLE60, EME60, DLE111, DLA58, DLA116 etc.)

Ø 25 mm aansluiting. Lengte 25 cm, diameter 6 cm, gewicht 225g.
Met de in- en uitgang richting de motor.

Deze demper zorgt ervoor dat de geluidsnorm van 80dBA kan worden gehaald.

KS-5247

Krumscheid Exhaust manifold with 2 bended sections 50 - 111cc

Geschikt voor de DLE35RA, RCGF55, DLE55, RCGF111, DLE111, DLA116, DLA116i2 Inline.

Ø 25 mm met 2 flexibele secties.
Lengte is ~28cm

Ook geschikt voor: 3W 60 und 120, DA 50, DA 100 B2, DLE 55, DLA 56, DLE 111, DLA 112, DLA116, DLA116i2 Inline.

KS-42055

Krumscheid Exhaust manifold with flexible tube 50 .. 111cc

Geschikt voor de DLE35RA, RCGF55, DLE55, RCGF111, DLE111.

Ø 25 mm met flexibele sectie (beperkt buigbaar, ~45 graden).
Lengte is ~27 cm

Ook geschikt voor: 3W 60 und 120, DA 50, DA 100 B2, DLE 55, DLA 56, DLE 111, DLA 112

KS-4755

Krumscheid Exhaust manifold 55 .. 111cc

Geschikt voor RCGF55, RCGF111, DLE55, DLE111, 3W 60, 120, DA 50, DA 100 B2, DLA 56, DLA 112

Ø 25 mm met flens.
Lengte is 30cm

KS-41155

Krumscheid Exhaust manifold double bended 55 .. 111cc

Geschikt voor RCGF55, RCGF111, DLE55, DLE111, 3W 60, 120, DA 50, DA 100 B2, DLA 56, DLA 112

Ø 25 mm met flens.
Lengte is ~34cm

Kijk naar o.a. Krumscheid geluidsdempers voor de mogelijkheden.

B42010RSC-CR

20x10" Biela 4-blade carbon semi scale propellor (Hamilton Logo)

For engines between 55 - 60 cc, including Hamilton logo.

B32010RSC

20x10" Biela 3-blade carbon semi scale propellor (Hamilton Logo)

For engines between 45 - 50 cc, including Hamilton logo.

B22210RSCBY

22x10" Biela 2-blade carbon semi scale propellor (Hamilton Logo)

For engines between 45 - 55 cc, including Hamilton logo.

Perfect fit for e.g. the Spitfire.

B12B2210WRLB

22x10" Biela 2-blade carbon propellor (Biela Logo)

For engines 50 cc, including Biela logo.

RCEXL-ICM6

CM6 Irridium Spark Plug

CM6 10mm Irridium Spark plug for gas engines from DLE, DLA, RCGF, NGH etc.
BPST080CC

Starter for engines upto 80cc

Heavy duty starter for engines upto 80cc.

Gear down (6:1) gives this engine a very high torque.

Bevat een extra groot start rubber en dus geschikt voor grote spinners. Start zeer eenvoudig b.v. 65cc motoren.

DLA58 Engine Spare Parts

DLA58-1-A

DLA58, DLA116, DLA116i2 Cylinder with angle

DLA58-2

DLA58 Crankshaft

DLA58-3

DLA58 Crankcase

DLA58-4

DLA58, DLA116, DLA116i2 Piston

DLA58-5

DLA58, DLA116, DLA116i2 Piston Ring

DLA58-7

DLA58 Exhaust Pipe

DLA58-8

DLA58, DLA116i2, DLA128 Carburetor (Tillotison)

DLA58-9

DLA58 Stand Off Mounts

DLA58-11

DLA58, DLA64, DLA116i2, DLA128 Admission Valve

DLA58-12

DLA58 Bearing Set (FAG)

DLA116-13

DLA116 Sensor for Ignition

DLA58-14

DLA58 Gasket Set

DLA58-15

DLA58 Screw Set

DLA58-16

DLA58, DLA64, DLA64i2 Prop Base/Hub with Washer

DLA58-17

DLA58 Needle Bearing for Piston

DLA58-18

DLA58, DLA64, DLA64i2 Prop Shaft

DLA58-19

DLA58 Woodruff Key

DLA58-21

DLA58 Drill Jig