ESM Iconic Model Airplane (130cm, 2kg, 600W)

ESM-E001

 ESM Iconic EP  Electric Power Airplane
 Wing span   (spanwijdte)  1296 mm   51"
 Length  1345 mm  53"
 Flying weight  1.9 kg                    4.2 lbs                 
 Radio  4 - 5 channels, 4 servos + ESC     
 Engine Brushless (elektro)  600 - 700 Watt Brushless

 << Vorige  

 Detailed specification continued:

 Wing area  31 dm2  3.3 sq.ft
 Wing loading  61.3 gr/dm2   20.1 oz/sq.ft
 Flying weight  1.9 kg                                 4.2 lbs                                        
 Radio  4 - 5 channels, 4 servos (2 aileron, rudder, elevator) and ESC
 Engine Brushless  (elektro)  Brushless:  FC4250-07 or FC3548-05
 Options  -
 Documentation  Assembly Manual
 Manufacturers website  ESM-Website

 

About the Iconic EP and XL... Based on the globally successful Adrenaline 1.20, the Iconic EP and XL are superb aerobatic models. Using the same construction techniques as its big brother, the Iconic has a moulded composite fuselage with Airex stiffeners and built up wings and tailplane parts for lightness. All surfaces are sprayed and sealed with eye catching graphics. No more film lifting or graphics peeling with this model!

Both the EP and XL can be powered by either electric or i.c. The EP comes with a brushless motor mount, whilst the XL is supplied with a fuel tank and engine mount. Apart from the obvious size difference the EP has a fatter slightly larger wing in comparison to its fuselage, whilst the XL is more the Adrenaline in wing section and proportions.

Most small aerobatic models are quite flimsy in their construction, and can get easily damaged both in use and whilst being transported. Not so with these models, with their robust construction and tough covering, ideal as a winter hack or to throw in the car for those lovely Summer evenings.

 

 Items needed to finish the model:

 Engine  FC4250-07 or FC3548-05 
 ESC  Pentium-60A or Dynam 70A
 Spinner  Alu/Carbon Spinner
 Propeller  13x6.5E or 14x6E
 Pilot  Select a pilot if required (mounting place to be created by customer)
 Landing gear  Included
 Servos

 4 x torque 5kg-cm e.g. SM-S4306B Generic Analog (5.6 kg / 0.18 sec / 45 gr)

 or SM-S4405B Generic High Speed Digital (4.8 kg / 0.10 sec / 40 gr)

 Extension Wires  2 x 45cm
 Power Switches

 1 x receiver switch (included with UBEC 8A)

 Batteries

 1 for the motor / receiver / servos     

 e.g. LiPo 3S or 4S 2100 - 2500 mAh 

 VR / UBEC

 1 x Voltage Regulator 8 - 15A for the receiver and servos if not present in the ESC.

 Receiver  1 x receiver and transmitter

  

!