In spite of its small size, the R6308SBT receiver features an integral FASSTest® telemetry transmitter, and can transmit a maximum of 32 telemetry data sets to the ground over a range of > 1000 m .
Any existing FASST system can be converted to telemetry operation at any time by using an R6308SBT 2.4 GHz FASST telemetry receiver.
Naturally the receiver is fitted with eight PWM outputs for normal servos. The PWM outputs are switchable, i.e. you can make use of either PWM channels 1...8 or 9...16. Two receivers can be operated in parallel to provide sixteen PWM channels.
Channel 8 can be switched to S.BUS mode, in which case up to eighteen S-BUS servos or other devices can be connected to this output.
Devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted. If two receivers are employed, the number of telemetry channels rises to 64.
The receiver's integral transmitter sends telemetry data present at the S.BUS2 socket to the Telemetry-Box by radio; the data are then displayed on the screen, or generated in the form of audible or speech output.
If a separate Wi-Fi-Box, No. F1667 with integral FASSTest® receiver module is used, the telemetry data can also or alternatively be transmitted to a smart-phone (Android, Apple), netbook, laptop, etc., and any monitor connected to that device.
When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.
The outstanding features of the receiver are its small size of just 47.3 x 24.9 x 14.3 mm and weight of only 13 g.
Frequency channels: 36
Antenna length: 14
Number of channels: 18
Weight approx: 13
Channel spacing: 2048